key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
This is an old revision of the document!
LCD Description |
|
|---|---|
| Model | PTP008471 |
| Manufacturer | Kenwood |
| Recovered from | DPX-MP4050B 1) |
| LCD type | |
| Polarizer type | |
| Columns | 8 |
| Rows | 1 |
| Char matrix | 5×7 |
| Driver IC | LC75808 |
| Backlight | LED 2) |
| Arduino driver | |
| Connector | |
| Num Pins | 16 |
| Pin spacing | 0.05“ |
| Arduino test rig 3) | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | D GND | |||
| 2 | CL 99 | CLK | ||
| 3 | DI 100 | DO | ||
| 4 | DO 97 | DI | ||
| 5 | INH 96 | INH | ||
| 6 | CE 98 | CE | ||
| 7 | LED GRN | |||
| 8 | LED BLU | |||
| 9 | LED RED | |||
| 10 | RST-SW | |||
| 11 | ILL GND | |||
| 12 | P GND | |||
| 13 | REMO | |||
| 14 | BU5V | |||
| 15 | LED11V | |||
| 16 | ILLUMI | |||
LC75808W (2000), LC75808W (2010)
Sanyo Computer Control Bus (CCB) protocol.
Sanyo CCB control from Arduino
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International