LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | GSL28A Flex |
| Manufacturer | |
| Recovered from | Instant-Link GSL28A Flex pager |
| Board IDs | 30-TJ04-218014 990531 GSL 1368MLB |
| LCD type | positive |
| Polarizer type | relective |
| Columns | 20 |
| Rows | 4 |
| Char matrix | 5×7 |
| Driver IC | mounted on PCB flex cable |
| Backlight | - |
| Arduino driver | |
| Connector | PCB flex cable |
| Num Pins | 45 |
| Pin spacing | 0.8mm |
May be dot addressable 120 x 32 pixels, or have programmable characters
| Connector pin-out | Arduino test rig 1) | |||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 | ||||
| 7 | ||||
| 8 | ||||
| 9 | ||||
| 10 | ||||
| 11 | ||||
| 12 | ||||
| 13 | ||||
| 14 | ||||
| 15 | ||||
| 16 | ||||
| 17 | ||||
| 18 | ||||
| 19 | ||||
| 20 | ||||
| 31 | ||||
| 32 | ||||
| 33 | ||||
| 34 | ||||
| 35 | ||||
| 36 | ||||
| 37 | ||||
| 38 | ||||
| 39 | ||||
| 40 | ||||
| 41 | ||||
| 42 | ||||
| 43 | ||||
| 44 | ||||
| 45 | ||||
Datasheets
Examples :
1)
reminder for my personal testing, not useful for anyone else!
Page Tools
electronic/lcd/gsl28a.1549095290.txt.gz · Last modified: 2019/02/02 21:14 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported