LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
LCD Description |
|
|---|---|
| Model | |
| Manufacturer | Brother |
| Recovered from | Brother/Telecom Home Fax 1) |
| Board IDs | B53K263-1 |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 |
| Rows | 1 |
| Char matrix | 5×7, or 5×8 ? |
| Driver IC | (CoG) |
| Backlight | - |
| Arduino driver | ? |
| Connector | PCB flex cable |
| Num Pins | 14 |
| Pin spacing | 0.04“ |
Not tested.
| Arduino test rig 2) | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | D7 | |||
| 2 | D6 | |||
| 3 | D5 | |||
| 4 | D4 | |||
| 5 | D3 | |||
| 6 | D2 | |||
| 7 | D1 | |||
| 8 | D0 | |||
| 9 | E | |||
| 10 | R/W | |||
| 11 | RS | |||
| 12 | GND | |||
| 13 | +5V | |||
| 14 | GND | |||
| Connector to flex PCB cable to LCD module | |||||
|---|---|---|---|---|---|
| Arduino test rig 3) | |||||
| Label | Pin# | Pin# | Label | colour | |
| 1 | D7 | ||||
| D6 | 2 | ||||
| 3 | D5 | ||||
| D4 | 4 | ||||
| 5 | D3 | ||||
| D2 | 6 | ||||
| 7 | D1 | ||||
| D0 | 8 | ||||
| 9 | E | ||||
| R/W | 10 | ||||
| 11 | RS | ||||
| GND | 12 | ||||
| 13 | +5V | ||||
| GND | 14 | ||||
Examples from Brother/Telecom Home Fax :
electronic/lcd/b53k2631.1540797820.txt.gz · Last modified: 2018/10/29 07:23 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International