key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | SSC2A16DRY ^Manufacturer|SDEC((www.sdec.com.tw))| ^Recovered from|-| ^Board IDs|LMC-SSC2A16, P-S2A16CT-E REV:2, J1004044 1025| ^LCD type|positive| ^Polarizer type|reflective| ^Columns|16| ^Rows|2| ^Char matrix|5x8| ^Driver IC|NT3881(({{:electronic:datasheet:novatek:nt3881d.pdf)) or equivalent (CoG) |
| Backlight | - |
| Arduino driver | LiquidCrystal.h |
| Connector | pin header |
| Num Pins | 14 |
| Pin spacing | 0.1“ |
| Module size | 85×30 mm |
| Connector pin-out | ||
|---|---|---|
| Pin# | Label | Descripion |
| 1 | VDD | +5V |
| 2 | VSS | GND |
| 3 | V0 | Contrast |
| 4 | RS | Register select |
| 5 | R/'W | Read/Write |
| 6 | E | Enable |
| 7 | DB0 | Data Bit 0 |
| 8 | DB1 | Data Bit 1 |
| 9 | DB2 | Data Bit 2 |
| 10 | DB3 | Data Bit 3 |
| 11 | DB4 | Data Bit 4 |
| 12 | DB5 | Data Bit 5 |
| 13 | DB6 | Data Bit 6 |
| 14 | DB7 | Data Bit 7 |
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International