LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | NG-87243-001 |
| Manufacturer | |
| Recovered from | Nec DTR-16D-1A |
| Board IDs | |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 24 |
| Rows | 3 |
| Char matrix | 5×8 |
| Driver IC | |
| Backlight | - |
| Arduino driver | |
| Connector | PCB flex |
| Num Pins | 16 |
| Pin spacing | 0.05“ |
| Module size | mm |
| Measured | Connector pin-out | Arduino test rig | ||||||
|---|---|---|---|---|---|---|---|---|
| Pin# | Main board | LCD board | LCD on | LCD off | IC pin | Label | Pin | colour |
| 1 | Green LED K | 1.7V | 0.0V | |||||
| 2 | LED A common | 0.8V | 0.0V | |||||
| 3 | Red LED K | 1.9V | 0.0V | |||||
| 4 | 2.9V | 0.1V | RS | |||||
| 5 | 0.4V | 0.1V | E | |||||
| 6 | 164k | 0.7V | 0.1V | D0 | ||||
| 7 | 1.4M | 0.6V | 0.2V | D1 | ||||
| 8 | 0.6V | 3.3V | D2 | |||||
| 9 | 0.3V | 3.3V | D3 | |||||
| 10 | 3.45k | 120k | 3.3V | 3.3V | Vcc | |||
| 11 | GND | GND | 0.0V | 0.0V | GND | |||
| 12 | 100k | 1.9V | 1.7V | Contrast? | ||||
| 13 | NC | 120k | 3.3V | 3.3V | Vcc | |||
| 14 | NC | 0.0V | 0.0V | |||||
| 15 | GND | GND | 0.0V | 0.0V | ||||
| 16 | NC | 0.0V | 0.0V | |||||
Datasheets
Examples :
1)
this file has an extra data glitch in it that fools sigrok into getting the nibbles aligned so the 2 nibble codes are easier to decode with the 'parallel' filter
electronic/lcd/ng87243.1612399747.txt.gz · Last modified: 2021/02/04 00:49 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International