LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
LCD Description |
|
|---|---|
| Model | MDP12BS17-SR-T (2142717-01) |
| Manufacturer | |
| Recovered from | Epson WF-2530 |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 1) |
| Rows | 2 |
| Char matrix | |
| Driver IC | mounted on LCD glass (CoG) |
| Backlight | - |
| Arduino driver | |
| Connector | pins |
| Num Pins | 8 |
| Pin spacing | 0.07“ |
LCD1 Pinout
| Arduino test rig 2) | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 | Vcc? | |||
| 7 | GND | |||
| 8 | ||||
JK33149A, 2142717-01 Board, CN1 pinout
| Arduino test rig 3) | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | Buzzer- | |||
| 2 | (lcd pin5) | |||
| 3 | GND | |||
| 4 | Vcc? | |||
| 5 | (lcd pin4 via 1.2k) | |||
| 6 | (lcd pin3 via 100Ω) | |||
| 7 | (74VHC595 pin 13 (output enable)) | |||
| 8 | (lcd pin1) | |||
| 9 | (74VHC165 pin 1 (parallel load)) | |||
| 10 | SW1 (closes to gnd) | |||
Examples :
electronic/lcd/mdp12bs17srt.1540077703.txt.gz · Last modified: 2018/10/20 23:21 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International