LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
LCD Description |
|
|---|---|
| Model | Lucille |
| Manufacturer | Lenco |
| Recovered from | Lenco Lucille Retro Radio |
| LCD type | positive |
| Polarizer type | transflective |
| Columns | 16 |
| Rows | 2 |
| Char matrix | 5×8 |
| Driver IC | Chip on Glass (CoG) |
| Backlight | blue LED |
| Arduino driver | |
| Connector | Pins |
| Num Pins | 10 |
| Pin spacing | 0.1“ |
| Arduino test rig 1) | ||||
|---|---|---|---|---|
| Pin# | Label | Measured | Pin | colour |
| 1 | Reset | |||
| 2 | MOSI | |||
| 3 | CS | |||
| 4 | SClk | |||
| 5 | MISO | |||
| 6 | Gnd | |||
| 7 | 3.3V | |||
| 8 | 2.6V | |||
| 9 | 3.11V, pulsing 2.6-4.5V | |||
| 10 | Vo | -0.6V, 22.5mS wave pulsing from 0v to -1V sloping down to -2V | ||
Examples :
1)
reminder for my personal testing, not useful for anyone else!
electronic/lcd/lucille.1540774582.txt.gz · Last modified: 2018/10/29 00:56 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International