LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
LCD Description |
|
|---|---|
| Model | B53K509-1, 2H128 |
| Manufacturer | Brother |
| Recovered from | Brother FAX-515 1) |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 2) |
| Rows | 1 |
| Char matrix | 5×8 |
| Driver IC | Hitachi HD44780 compatible (CoG) |
| Backlight | - |
| Arduino driver | LiquidCrystal.h |
| Connector | PCB flex cable |
| Num Pins | 14 |
| Pin spacing | 0.04” |
| Arduino test rig 3) | ||
|---|---|---|
| Pin# | Label | Pin |
| 1 | D7 | d7 |
| 2 | D6 | d6 |
| 3 | D5 | d5 |
| 4 | D4 | d4 |
| 5 | D3 | |
| 6 | D2 | |
| 7 | D1 | |
| 8 | D0 | |
| 9 | E | d9 |
| 10 | R/W | Gnd |
| 11 | RS | d8 |
| 12 | VO | Wiper of pot between +5V and Gnd |
| 13 | +5V | +5V |
| 14 | GND | Gnd |
| Connector to flex PCB cable to LCD module | |||||
|---|---|---|---|---|---|
| Arduino test rig 4) | |||||
| Label | Pin# | Pin# | Label | Pin | |
| 1 | D7 | d7 | |||
| D6 | 2 | d6 | |||
| 3 | D5 | d5 | |||
| D4 | 4 | d4 | |||
| 5 | D3 | ||||
| D2 | 6 | ||||
| 7 | D1 | ||||
| D0 | 8 | ||||
| 9 | E | d9 | |||
| R/W | 10 | Gnd | |||
| 11 | RS | d8 | |||
| VO | 12 | Wiper of pot between +5V and Gnd | |||
| 13 | +5V | +5V | |||
| GND | 14 | Gnd | |||
Examples :
Character set, NB first 4 characters are programmable and defined by the this test program:
electronic/lcd/b53K5091.1541845629.txt.gz · Last modified: 2018/11/10 10:27 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International