LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
| Manufacturer | |
|---|---|
| Model | 16119 S2 |
| Recovered from | |
| Columns | 16 |
| Rows | 1 |
| Char matrix | 5×11 |
| Driver IC | Hitachi HD44780A00, HD44100H |
| Backlight | - |
| Arduino driver | 44780 |
| Connector | |
| Num Pins | 14 |
| Pin spacing | 0.1 |
LCD sub-board :
| Arduino test rig 1) | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | gnd | |||
| 2 | 33 | vcc | ||
| 3 | 30 | v5 2) | ||
| 4 | 36 | rs | ||
| 5 | 37 | r/w' | ||
| 6 | 38 | e | ||
| 7 | 39 | d0 | ||
| 8 | 40 | d1 | ||
| 9 | 41 | d2 | ||
| 10 | 42 | d3 | ||
| 11 | 43 | d4 | ||
| 12 | 44 | d5 | ||
| 13 | 45 | d6 | ||
| 14 | 46 | d7 | ||
Pin out of IDC connector on secondary board that is connected via ribbon cable to the LCD board:
| Arduino test rig 3) | Arduino test rig 4) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pin# | Label | LCD pin | Pin | colour | Pin# | Label | LCD pin | Pin | colour |
| 1 | gnd | 1 | gnd | 2 | gnd | 1 | gnd | orange | |
| 3 | nc | 4 | vcc | 2 | +5v | red | |||
| 5 | nc | 6 | nc | ||||||
| 7 | nc | 8 | rs | 4 | d8 | yellow | |||
| 9 | nc | 10 | r/w' | 5 | gnd | green | |||
| 11 | nc | 12 | e | 6 | d9 | grey | |||
| 13 | nc | 14 | d0 | 7 | |||||
| 15 | nc | 16 | d1 | 8 | |||||
| 17 | nc | 18 | d2 | 9 | |||||
| 19 | nc | 20 | d3 | 10 | |||||
| 21 | nc | 22 | d4 | 11 | d4 | purple | |||
| 23 | nc | 24 | d5 | 12 | d5 | grey | |||
| 25 | d7 | 14 | d7 | white/blue | 26 | d6 | 13 | d6 | white |
Examples :
electronic/lcd/16119s2.1523231091.txt.gz · Last modified: 2018/04/08 23:44 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International