Stepper Motor Data
Small
Square
Round
Ben Wirz archive
Casa archive
| Stepper Description | ||
|---|---|---|
| Model | KP4M4-001, 966000-001 | |
| Manufacturer | Tandon (also made by Japan Servo Motors) | |
| Recovered from | Tandon TM100-2A | |
| Drive method | unipolar | |
| Number of phases | 4 | |
| Winding colours | - | |
| Step angle | °/step | 3.6 |
| Voltage | V | 12 |
| Current | A/phase | 0.15 |
| Winding resistance | ohm/phase | 75 |
| Inductance | mH/phase | - |
| Holding torque | mN*m | - |
| Detent torque | mN*m | - |
| Rotor inertia | g*cm*cm | - |
| Height | mm | 42 |
| Width | mm | 42 (Nema 17) |
| Shaft length | mm | 27 |
| Shaft diameter | mm | 5 |
| Weight | g | 268 |
| Insulation Class | - | |
| Insulation resistance | - | |
| Dielectric strength | - | |
| Operating temperature range | °C | - |
| Allowable temperature rise | ° | - |
Examples
Page Tools
electronic/actuator/stepper/kp4m4001.txt · Last modified: 2022/08/04 16:55 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported