This is an old revision of the document!
| DC Motor Description | ||||
|---|---|---|---|---|
| Manufacturer | Mabuchi | |||
| Model | RS 750SH | |||
| Recovered from | Makita 6095D drill | |||
| Normal voltage | 12 VDC | |||
| Voltage range | 6-12 VDC | |||
| Performance | 12V, no load | 12V, 496 g-cm load | ,4010 g-cm load | |
| Speed | 15,000 RPM | 12,670 RPM | Stall | |
| Current | 1.79 A | 7.52 A | 55.6 A | |
| Stall current | 55.6 | |||
| Starting torque | g-cm | |||
| Rotation | Either direction, depending on power polarity | |||
| Dimensions | (not including shaft) | Shaft | ||
| Length | mm | mm | ||
| Diameter | mm | 5 mm | ||
| Weight | 290 g | |||
| Connectors | Lugs | |||
Examples
Recovered from: Makita 6095D drill:
 |  |  |
electronic/actuator/dcmotor/rs750.1647494810.txt.gz · Last modified: 2022/03/17 05:26 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International