This is an old revision of the document!
| DC Motor Description | ||||
|---|---|---|---|---|
| Manufacturer | Buehler Products Inc. | |||
| Model | 13.65.12/12V | |||
| Recovered from | - | |||
| Normal voltage | 12 VDC | |||
| Voltage range | VDC | |||
| Performance | V, no load | V, g-cm load | , g-cm load | |
| Speed | ,000 RPM | ,000 RPM | ||
| Current | mA | |||
| Stall current | ||||
| Starting torque | g-cm | |||
| Rotation | Either direction, depending on power polarity | |||
| Dimensions | (not including shaft) | Shaft | ||
| Length | mm | mm | ||
| Diameter | mm | mm | ||
| Weight | g | |||
| Connectors | ||||
| Wiring Colours | |
|---|---|
| Blue | Armature negative |
| Red | Armature positive |
| Green and Yellow | Velocity sensor |
The tachometer provides a sinusoidal voltage with varying frequency and amplitude. You can use a full-wave rectifier and capacitor to turn this signal into DC. Calibration is required.
Examples
Page Tools
electronic/actuator/dcmotor/13.65.12.1581497352.txt.gz · Last modified: 2020/02/12 21:49 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported