My Projects

This is an old revision of the document!


Published 10 Mar 2018

Reusing Linear CCDs

I have a pile of old CCD (charge-coupled device) imaging sensors from old fax machines and hand-held page scanners that I would like to use in projects. Recovered CCDs

Overview

Faxes and document scanners often contain linear CCDs. CCDs recovered from older faxes and scanners are often mounted on their own circuit boards with buffers, and amplifiers, but require external clocking and ADC (analog to digital converter) support to connect them to a digital system.

Hardware description

The CCD linear arrays (usually thousands of elements) are exposed to the light to be imaged, the analog values of each sensor element are transferred in parralell to an analog shift register, which is then shifted out to an external ADC. So the ultimate output is a serial stream of digitised values representing the imaged line.

Recovered LCD modules

On the sidebar there is a list of CCD modules that I have recovered from various pieces of scrap equipment and the linked pages include pinouts etc.

References and Additional Resources

  • Linear Array CCD Data Acquisition System Based on FPGA - description of TCD103D operation (Chinese, English).
  • Fabrication of multichannel spectrometer using CCD one-dimensional image sensor and PIC16F84 (Japanese, English) (Uses TCD132D CCD).
  • Hackaday linear CCD, TCD1304-based linear CCD module driven by a Nucleo F401RE + Raspberry Pi.

Datasheets