Published 8 Oct 2026
Arduino Ethernet Shield 2
Overview
| Shield Description | |
|---|---|
| Model | Ethernet Shield 2 |
| Manufacturer | Arduino |
| Brand | Arduino |
| Clone of | - |
| Arduino compatibility | Uno |
| Type | Ethernet |
| Voltage | 5V |
| Current | |
| Software | |
Overview
An ethernet networking interface.
Features
- Wiznet W5500 ethernet chip with internal 32K buffer
- Provides a network (IP) stack capable of both TCP and UDP
- Connection speed: 10/100Mb
- Supports up to eight simultaneous socket connections
- Uses SPI on digital pins 10, 11, 12, and 13 (pins 50, 51, and 52 on the Mega), and pin 4 for the SD card
- Micro‐SD card slot
Examples
References and Additional Resources
- https://www.arduino.cc/en/uploads/Main/arduino-Ethernet-Shield2-V2-rd.zip Eagle files in Zip
If any referenced page no longer exists, try looking for its URL on http://archive.org.
Page Tools
electronic/boards/shield/a000024.txt · Last modified: 2026/10/08 20:24 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International