My Projects

You are here: start » electronic » lcd » nokia3310

My Projects

User Tools

Site Tools

You are here: start » electronic » lcd » nokia3310

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
electronic:lcd:nokia3310 [2022/10/02 07:06] – tonyelectronic:lcd:nokia3310 [2026/10/01 02:39] (current) – [Examples] tony
Line 1: Line 1:
-{{ :electronic:lcd:.jpg?200|Nokia 3310}}+{{ :electronic:lcd:pa054787a.jpg?200|Nokia 3310 overview}}
 ^  LCD Description  || ^  LCD Description  ||
 ^Model|**Nokia 3310**| ^Model|**Nokia 3310**|
-^Manufacturer|| +^Manufacturer|Philips| 
-^Recovered from|[[ :electronic:equipment:phone:nokia3310|Nokia 3310 phone]] |+^Recovered from|[[ :electronic:equipment:phone:nokia3310|Nokia 3310 cellphone]] |
 ^Board IDs|| ^Board IDs||
 ^LCD type|positive| ^LCD type|positive|
Line 10: Line 10:
 ^Rows|48 pixels| ^Rows|48 pixels|
 ^Char matrix|-| ^Char matrix|-|
-^Driver IC||+^Driver IC|{{https://www.sparkfun.com/datasheets/LCD/Monochrome/Nokia5110.pdf|Philips PCD8544}}|
 ^Backlight|-| ^Backlight|-|
-^Arduino driver||+^Arduino driver|U8g2lib.h|
 ^Connector|pins| ^Connector|pins|
 ^Num Pins|8| ^Num Pins|8|
Line 18: Line 18:
 ^Module size|mm| ^Module size|mm|
  
-^  Connector pin-out  ^^^  Arduino test rig  || +{{:electronic:lcd:lph7779.gif|LCD front view diagram}}\\ 
-^Pin#^IC pin^Label^Pin^colour| +Connector layout, LCD front view 
-^1| +^  LCD pinout  ^^^ 
-^2| +^Pin^Label^Description| 
-^3| +^1|VDD|2.7V - 3.3V| 
-^4| +^2|CLK|Clock| 
-^5| +^3|SDIN|Data in| 
-^6| +^4|D/C|Data or command| 
-^7| +^5|SCE|Chip select| 
-^8|+^6|VSS|Ground| 
 +^7|VLCD|DC/DC voltage converter| 
 +^8|RES|Reset| 
 +^ ||| 
 +^9| |Cap1| 
 +^10| |Cap1| 
 +^11| |Cap2| 
 +^12| |Cap2|
 \\ \\
 +----
 +===== Schematics =====
 +^Nokia 3310 LCD schematic :^
 +
 +{{:electronic:lcd:nokia_3310_lcd_schematic.png?600|Nokia 3210 LCD circuit}}
 +
 \\ \\
 +----
 +===== Examples =====
 +
 +{{:electronic:lcd:pa030159b.jpg?800|Nokia 3310 front}}
 +{{:electronic:lcd:pa030160b.jpg?800|Nokia 3310 back}}
 +
 +|{{:electronic:lcd:.jpg?800|Nokia 3310 back}}
 +{{:electronic:lcd:dsc_0317b.jpg?800|Nokia 3310 overview with board front}}
 +{{:electronic:lcd:dsc_0318b.jpg?800|Nokia 3310 overview with board back}}
 +
 +{{:electronic:lcd:pa030145a.jpg?300|NOKIA3310 connector}}\\
 +The edge of the LCD has two capacitors mounted on it, but they don't appear to be connected as there are no pins that contact their four copper edge pads.
 +
 +|{{:electronic:lcd:.jpg?300|Nokia 3310 chip}}
 +|{{:electronic:lcd:.jpg?300|Nokia 3310 character set}}
 +{{:electronic:equipment:phone:pa010123a.jpg?400|Nokia 3310 examples}}\\
 +
 +{{:electronic:lcd:pa034775.jpg?400|Nokia 3310 examples}}\\
 +{{:electronic:lcd:pa034776.jpg?400|Nokia 3310 examples}}\\
 +{{:electronic:lcd:pa034777.jpg?400|Nokia 3310 pixel layout}}
 +|{{:electronic:lcd:.jpg?800|Nokia 3310 circuit}}
 +
 +  * Library:  [[Adafruit_GFX.h]]
 +  * Library:  [[Adafruit_PCD8544.h]]
 +    *  {{:arduino:life:.ino|Bouncing cube.ino}}
 +    * <html><video width="400"  controls><source src="http://projects.scorchingbay.nz/dokuwiki/_media/electronic/lcd/pa054785a.mp4" type="video/mp4">Your browser does not support the video tag. <a href="/dokuwiki/_media/electronic/lcd/pa054785a.mp4">∇</a></video></html>
 +     * Worm.ino
 +    * <html><video width="400"  controls><source src="http://projects.scorchingbay.nz/dokuwiki/_media/electronic/lcd/pa044781a.mp4" type="video/mp4">Your browser does not support the video tag. <a href="/dokuwiki/_media/electronic/lcd/pa044781a.mp4">∇</a></video></html>
  
 ---- ----
-===== Examples : ===== 
  
-{{:electronic:lcd:.jpg?800|NOKIA3310 front}} +===== Mounting on PCB ===== 
-|{{:electronic:lcd:.jpg?800|NOKIA3310 back}} +To reuse these in Arduino projects it is useful to have them mounted on a PCB.  
-|{{:electronic:lcd:.jpg?800|NOKIA3310 overview with board}} + 
-|{{:electronic:lcd:.jpg?300|NOKIA3310 connector}} +After disassembly (plastic welds holding bezel must be sliced off) the LCD can be extracted and fitted as a perfect replacement in a Diymore Nokia 3310 LCD adapter board:\\ 
-|{{:electronic:lcd:.jpg?300|NOKIA3310 chip}} +{{:electronic:lcd:pa030159a.jpg?400|Nokia 3310 LCD disassembled top}} 
-|{{:electronic:lcd:.jpg?300|NOKIA3310 character set}} +{{:electronic:lcd:pa030160a.jpg?400|Nokia 3310 LCD disassembled bottom}} 
-|{{:electronic:lcd:.jpg?400|NOKIA3310 examples}} + 
-|{{:electronic:lcd:.jpg?200|NOKIA3310 pixel layout}} +{{:electronic:lcd:pa030154a.jpg?400|Nokia 3310 LCD with Nokia 3310 bezel and reflector ready for reassembly, top}} 
-|{{:electronic:lcd:.jpg?800|NOKIA3310 circuit}}+{{:electronic:lcd:pa030153a.jpg?400|Nokia 3310 LCD with Nokia 3310 bezel and reflector ready for reassembly, bottom}}\\ 
 + 
 +{{:electronic:lcd:pa030143a.jpg?200|Nokia 3310 remounted, overview}} 
 +\\
  

Page Tools

electronic/lcd/nokia3310.1664694379.txt.gz · Last modified: 2022/10/02 07:06 by tony
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International