My Projects

You are here: start » electronic » lcd » mdp12bs17srt

My Projects

User Tools

Site Tools

You are here: start » electronic » lcd » mdp12bs17srt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
electronic:lcd:mdp12bs17srt [2018/11/01 00:12] – tonyelectronic:lcd:mdp12bs17srt [2026/09/26 08:26] (current) – tony
Line 1: Line 1:
 {{ :electronic:lcd:p8170777a.jpg?200|MDP12BS17-SR-T}} {{ :electronic:lcd:p8170777a.jpg?200|MDP12BS17-SR-T}}
-^<html><p style="text-align:center">LCD Description</p></html>||+^  LCD Description  ||
 ^Model|**MDP12BS17-SR-T** | ^Model|**MDP12BS17-SR-T** |
 ^Manufacturer| | ^Manufacturer| |
Line 17: Line 17:
 ^Pin spacing|0.07"| ^Pin spacing|0.07"|
  
-^LCD1 Pinout^^^^Arduino test rig ((reminder for my personal testing, not useful for anyone else!))||+^  LCD1 Pinout  ^^^^  Arduino test rig ((reminder for my personal testing, not useful for anyone else!))  |||
 ^Pin#^IC Label^Funtion^Connected to^Measured^Pin^colour| ^Pin#^IC Label^Funtion^Connected to^Measured^Pin^colour|
 ^1|CSB|Chip Select|(cn1 pin 8)|3.38V| ^1|CSB|Chip Select|(cn1 pin 8)|3.38V|
Line 24: Line 24:
 ^4|SCLK|Clock|(cn1 pin5 via 220Ω), (74VHC595 pin 11 (clock) via 220Ω), (74VHC165 pin 2 (clock) via 220Ω) 250kHz or 3MHz|0V| ^4|SCLK|Clock|(cn1 pin5 via 220Ω), (74VHC595 pin 11 (clock) via 220Ω), (74VHC165 pin 2 (clock) via 220Ω) 250kHz or 3MHz|0V|
 ^5|SDA|Data In|(cn1 pin2),  (74VHC165 pin 9 (QH) via 3.3k)|3.38V| ^5|SDA|Data In|(cn1 pin2),  (74VHC165 pin 9 (QH) via 3.3k)|3.38V|
-^6|VDD|Power |3.38V|+^6|VDD|Power |3.38V, bypass capacitor to GND|
 ^7|VSS|Ground|oV| ^7|VSS|Ground|oV|
 ^8|VG|LCD power|capacitor to GND|6.94V| ^8|VG|LCD power|capacitor to GND|6.94V|
  
-^JK33149A, 2142717-01 Board, CN1 pinout^^^Arduino test rig ((reminder for my personal testing, not useful for anyone else!))||+^  JK33149A, 2142717-01 Board, CN1 pinout  ^^^  Arduino test rig ((reminder for my personal testing, not useful for anyone else!))  ||
 ^Pin#^Label^Connected to^Pin^colour| ^Pin#^Label^Connected to^Pin^colour|
 ^1| |Buzzer-| ^1| |Buzzer-|
Line 48: Line 48:
 IC1 & IC2 can use power supplies of 2V to 5.5V, LCD 3.3V powered? IC1 & IC2 can use power supplies of 2V to 5.5V, LCD 3.3V powered?
  
 +\\
 +===== Datasheets =====
 +  * {{:electronic:lcd:epson_wf-2530_lcd.pdf|LCD initialisation sequence from sigrok analysis}}
 +  * {{:electronic:lcd:epson_wf-2530_lcd.sr|LCD initialisation sequence in sigrok format}}
 +
 +\\
 ---- ----
-===== Examples : =====+===== Examples ===== 
 + 
 +{{:electronic:lcd:p8170777a.jpg?800|MDP12BS17-SR-T front}} 
 + 
 + 
 +{{:electronic:lcd:p1043588a.jpg?800|MDP12BS17-SR-T overview with board}}
  
-{{:electronic:lcd:p8170777a.jpg?800|MDP12BS17-SR-T}}+{{:electronic:lcd:pa252270a.jpg?300|MDP12BS17-SR-T connector}}
  
-{{:electronic:lcd:pa252266b.jpg?800|MDP12BS17-SR-T}}+{{:electronic:lcd:pa252266b.jpg?800|MDP12BS17-SR-T examples}}
  
-{{:electronic:lcd:pa252270a.jpg?400|MDP12BS17-SR-T}} 

Page Tools

electronic/lcd/mdp12bs17srt.1541031164.txt.gz · Last modified: 2018/11/01 00:12 by tony
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International