My Projects

You are here: start » electronic » lcd » diymore3310

My Projects

User Tools

Site Tools

You are here: start » electronic » lcd » diymore3310

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
electronic:lcd:diymore3310 [2022/10/06 20:14] – tonyelectronic:lcd:diymore3310 [2026/09/26 08:25] (current) – tony
Line 43: Line 43:
 ^7|LED|Backlight Control| | | ^7|LED|Backlight Control| | |
 ^8|GND|Power Ground| | | ^8|GND|Power Ground| | |
 +
 \\ \\
- 
----- 
 ===== Additional info ===== ===== Additional info =====
   * [[https://www.adafruit.com/product/338|Nokia 5110/3310 monochrome LCD + extras]]   * [[https://www.adafruit.com/product/338|Nokia 5110/3310 monochrome LCD + extras]]
Line 73: Line 72:
   * [[:electronic:lcd:nokia2|Nokia colour displays]].   * [[:electronic:lcd:nokia2|Nokia colour displays]].
  
 +\\
 ===== Driver libraries ===== ===== Driver libraries =====
  
Line 97: Line 96:
      * <html><video width="400"  controls><source src="/dokuwiki/_media/electronic/lcd/pc074063a.mp4" type="video/mp4">Your browser does not support the video tag.</video></html>      * <html><video width="400"  controls><source src="/dokuwiki/_media/electronic/lcd/pc074063a.mp4" type="video/mp4">Your browser does not support the video tag.</video></html>
  
 +\\
 ===== Applications ===== ===== Applications =====
   * [[https://thecavepearlproject.org/2018/05/18/adding-the-nokia-5110-lcd-to-your-arduino-data-logger/|Using the Nokia 5110 LCD with an Arduino Data Logger]]((includes using minimal drivers))   * [[https://thecavepearlproject.org/2018/05/18/adding-the-nokia-5110-lcd-to-your-arduino-data-logger/|Using the Nokia 5110 LCD with an Arduino Data Logger]]((includes using minimal drivers))
  
 +\\
 ===== Notes ===== ===== Notes =====
 There are two common Nokia phone LCD modules regularly for sale.  Most commonly described as Nokia 5110 boards, some are infact designed for the Nokia 3310 LCD.  The two modules are functionally the same, but have slightly different wiring as one module uses a 9 pin LCD (LPH7366, Nokia 5110) and the other an 8 pin LCD (LPH7779, Nokia 3310). There are two common Nokia phone LCD modules regularly for sale.  Most commonly described as Nokia 5110 boards, some are infact designed for the Nokia 3310 LCD.  The two modules are functionally the same, but have slightly different wiring as one module uses a 9 pin LCD (LPH7366, Nokia 5110) and the other an 8 pin LCD (LPH7779, Nokia 3310).
Line 111: Line 112:
 The cheaper PCB mounts for these displays have only 4 backlight LEDs compared to 6 on some phones, and the LEDs are mounted facing up, rather than sideways,  horizontally across the board,  so don't spread light very evenly. The cheaper PCB mounts for these displays have only 4 backlight LEDs compared to 6 on some phones, and the LEDs are mounted facing up, rather than sideways,  horizontally across the board,  so don't spread light very evenly.
  
-===== Examples : =====+\\ 
 +---- 
 +===== Examples =====
  
 {{:electronic:lcd:pb253707b.jpg?800|Diymore 3310 front}} {{:electronic:lcd:pb253707b.jpg?800|Diymore 3310 front}}

Page Tools

electronic/lcd/diymore3310.txt · Last modified: 2026/09/26 08:25 by tony
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International