Differences
This shows you the differences between two versions of the page.
|
electronic:lcd:dg12864 [2019/11/24 22:28] tony |
electronic:lcd:dg12864 [2022/09/19 07:38] (current) tony |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| ^LCD type|positive| | ^LCD type|positive| | ||
| ^Polarizer type|transflective| | ^Polarizer type|transflective| | ||
| - | ^Columns|128| | + | ^Columns|128 pixels| |
| - | ^Rows|64| | + | ^Rows|64 pixels| |
| ^Char matrix|-| | ^Char matrix|-| | ||
| ^Driver IC|2x Samsung S6B0108A01-00 (({{:electronic:datasheet:samsung:s6b0108_v0.0.pdf}})),\\ 1x Samsung S6B0107B01-00 (({{:electronic:datasheet:samsung:s6b0107_v0.0.pdf}}))| | ^Driver IC|2x Samsung S6B0108A01-00 (({{:electronic:datasheet:samsung:s6b0108_v0.0.pdf}})),\\ 1x Samsung S6B0107B01-00 (({{:electronic:datasheet:samsung:s6b0107_v0.0.pdf}}))| | ||
| - | ^Backlight|Yellow-green LED| | + | ^Backlight|yellow-green LED| |
| ^Arduino driver|openGLCD.h| | ^Arduino driver|openGLCD.h| | ||
| ^Connector|pin header| | ^Connector|pin header| | ||
| Line 18: | Line 18: | ||
| ^ Connector pin-out ^^^^ Arduino test rig | | ^ Connector pin-out ^^^^ Arduino test rig | | ||
| - | ^Pin#^Label^Descriptionl^Measured^Pin| | + | ^Pin#^Label^Description^Measured^Pin| |
| ^1|Vss|Ground (0V)|0V|GND| | ^1|Vss|Ground (0V)|0V|GND| | ||
| ^2|Vdd|Power supply for Logic circuit (+)|+5.12V|+5V| | ^2|Vdd|Power supply for Logic circuit (+)|+5.12V|+5V| | ||
Page Tools
electronic/lcd/dg12864.txt · Last modified: 2022/09/19 07:38 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported