Differences

This shows you the differences between two versions of the page.

--- electronic:lcd:4035 [2018/12/14 08:04] – created tony
+++ electronic:lcd:4035 [2026/09/26 07:45] (current) – tony
@@ Line 1: / Line 1: @@
 {{ :electronic:lcd:p7149913a.jpg?200|4035}}
-^<html><p style="text-align:center">LCD Description</p></html>||
+^  LCD Description  ||
 ^Model|**4035**|
 ^Manufacturer|Alcatel|
-^Recovered from|Alcatel Anthracite 4035|
+^Recovered from|[[:electronic:equipment:phone:4035|Alcatel 4035 phone]]|
 ^LCD type|positive|
 ^Polarizer type|reflective|
@@ Line 9: / Line 9: @@
 ^Rows|2|
 ^Char matrix| |
-^Driver IC|NT3881DFG-52, ST7063C-QG|
+^Driver IC|NT3881DFG-52(({{:electronic:datasheet:novatek:nt3881d.pdf}})), ST7063C-QG|
 ^Backlight|-|
 ^Arduino driver| |
 ^Connector| |
-^Num Pins||
+^Num Pins| |
-^Pin spacing|"|
+^Pin spacing| |
-^ ^^^||
+^  Connector pin-out  ||^  Arduino test rig |
-^Pin#^IC pin^Label^Pin^colour|
+^Pin#^Label^Description ^Pin|
 ^1|
 ^2|
@@ Line 38: / Line 38: @@
 ^19|
 ^20|
-\\
-\\
+The phone had 3 LCD panels, one was a 40x2 alphanumeric LCD, the other two displayed two columns of bar icons.  All LCDs are connected to the main board via conductive rubber strips, so difficult to use elsewhere.  The LCD drivers appear to run off 5V, not sure where that is regulated on the board.
+\\
 ----
-===== Examples : =====
+===== Examples =====
+{{:electronic:lcd:p7149913a.jpg?800|4035 front}}
-{{:electronic:lcd:p7149913a.jpg?800|4035}}
+{{:electronic:equipment:phone:p7149911a.jpg?800|4035 overview with board}}

My Projects