This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| electronic:equipment:camera:5310wa [2023/06/28 10:17] – [Operation] tony | electronic:equipment:camera:5310wa [2026/09/05 05:03] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | {{: | ||
| + | < | ||
| + | < | ||
| + | \\ | ||
| + | |||
| + | ===== Overview ===== | ||
| + | ^ Camera data || | ||
| + | ^Model|[[http:// | ||
| + | ^Manufacturer|[[https:// | ||
| + | ^Board IDs|| | ||
| + | ^Type|TrailCam| | ||
| + | ^Memory card|SD| | ||
| + | ^Date|2014| | ||
| + | |||
| + | The //Ltl Acorn 5310wa//, is a Trail-cam/ | ||
| + | |||
| + | < | ||
| + | <div class=" | ||
| + | <a href="/ | ||
| + | <div class=" | ||
| + | Ltl Acorn 5310wa | ||
| + | </ | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | Designed for monitoring wildlife or security/ | ||
| + | |||
| + | ===== Hardware description ===== | ||
| + | The// Ltl Acorn 5310a// has a 5 Megapixel camera (interpolated to 12Mp ((many adverts seem to fudge whether it has a 12MP sensor))), and two passive infrared sensors. | ||
| + | |||
| + | Described as a 12MP camera in advertising, | ||
| + | |||
| + | The original version has no microphone, but later revisions incorporate a mono microphone under a small hole to the right of the PIR sensors. | ||
| + | |||
| + | ^Feature^Specifications| | ||
| + | ^Firmware version|V1.0.026TA| | ||
| + | ^Lens|F = 2.8; FOV = 100°; Auto infrared cutout| | ||
| + | ^Image sensor|5 Megapixel (2592 x 1944) colour CMOS| | ||
| + | ^ISO sensitivity| | | ||
| + | ^Image size|5 Mp (2592 x 1944), 12Mp (4000 x 3000)| | ||
| + | ^Video size|1280 x 720 at 20fps, 640 x 480 at 30 fps, 320 x 240 at 30 fps| | ||
| + | ^Infrared flash range|20 m| | ||
| + | ^LCD screen|48 x 35.69 mm; 480 x 234 pixel; 16.7 M colour| | ||
| + | ^Memory SD card|Up to 16 GB, preferably HC 10 speed| | ||
| + | ^PIR sensitivity|Off/ | ||
| + | ^PIR sensing distance|20 m(below 25°C)| | ||
| + | ^Prep PIR sensing angle|Left and right light beams form an angle of 100°; Each lens covers 10°| | ||
| + | ^Main PIR sensing angle|35°| | ||
| + | ^Operation mode|Day/ | ||
| + | ^Trigger delay|0.6 sec (when using the 2 GB SD card)| | ||
| + | ^reTrigger interval|0 sec to 60 min| | ||
| + | ^Still photos|1 to 3| | ||
| + | ^Video length|1 to 60 sec| | ||
| + | ^Photo plus video|Takes still photo then video| | ||
| + | ^Sound plus video|no| | ||
| + | ^Time lapse capture|1 sec to 24 hours| | ||
| + | ^Time lapse plus photo|no| | ||
| + | ^Time stamp photos|ID, moon phase, temperature (ºF, ºC), date and time| | ||
| + | ^Time stamp videos|Date and time| | ||
| + | ^Password|4-digit PIN| | ||
| + | ^Device ID setting|4 alphanumeric characters| | ||
| + | ^Power supply|4 x AA (8 x AA with backpack). Or external 6V DC| | ||
| + | ^Stand by current|400 µA| | ||
| + | ^Stand by time|3 months (6 months with backpack)| | ||
| + | ^Power saving|Auto power off after 2 minutes of keypad inactivity| | ||
| + | ^Power consumption|150 mA (+500 mA when infrared LEDs fire)| | ||
| + | |||
| + | ^Feature^Specifications| | ||
| + | ^Firmware version|V161027_53W| | ||
| + | ^Image sensor|5 Megapixel (2592 x 1944) colour CMOS| | ||
| + | ^Image size|5 Mp (2592 x 1944), 12Mp (4000 x 3000)| | ||
| + | ^Video size|1920 x 1080 at 15fps, 1280 x 720 at 20fps, 640 x 480 at 30 fps, 320 x 240 at 30 fps| | ||
| + | ^Sound plus video|mono| | ||
| + | |||
| + | ==== Components ==== | ||
| + | * | ||
| + | |||
| + | ===== Operation ===== | ||
| + | Opening the cover at the bottom reveals the battery compartment, | ||
| + | |||
| + | "// | ||
| + | |||
| + | For normal operation it is switched to the middle position : "// | ||
| + | |||
| + | The prep sensor wakes up the camera so that it is ready to trigger when movement is detected on the main sensor. | ||
| + | |||
| + | It can be set to take a burst of photos or a video (or both) every time the PIR sensors detect motion. | ||
| + | |||
| + | In time-lapse mode it can take a burst of photos and/or a video at regular intervals, and it also takes PIR triggered images too if they occur (timing doesn' | ||
| + | |||
| + | There are also two start/stop timers so that the camera can be made to be only active during specified periods. | ||
| + | |||
| + | ==== Normal operation ==== | ||
| + | Setup mode starts up after a 2 second delay when the OFF/ON/TEST switch is switched from "// | ||
| + | ==== " | ||
| + | __Blue menu background, firmware V1.0.026TA: | ||
| + | ^ Setup || | ||
| + | ^Mode|Camera/ | ||
| + | ^Format|| | ||
| + | ^Photo Size|5MP/ | ||
| + | ^Video Size|720P/ | ||
| + | ^Set Clock|| | ||
| + | ^Picture No.|01 Photo/02 Photos/03 Photos| | ||
| + | ^Video Length|AVI 1 Sec thru AVI 60 Sec| | ||
| + | ^Interval|0 Sec thru 60 Min| | ||
| + | ^Sense Level|Off/ | ||
| + | ^Time Stamp|On/ | ||
| + | ^Timer1|On/ | ||
| + | ^Timer2|On/ | ||
| + | ^Password Set|On/Off| | ||
| + | ^Serial NO|On/Off| | ||
| + | ^Time Lapse|On/ | ||
| + | ^Side PIR|On/Off| | ||
| + | ^Default Set|| | ||
| + | In this version of the firmware, if there is no SD card present the Acorn logo and sound appears, then the screen goes blank with no live screen or menu. | ||
| + | \\ | ||
| + | \\ | ||
| + | \\ | ||
| + | \\ | ||
| + | |||
| + | __Green menu background, firmware V161027_53W: | ||
| + | ^ Setup || | ||
| + | ^Mode|Camera/ | ||
| + | ^Format|| | ||
| + | ^Photo Size|5MP/ | ||
| + | ^Video Size|720P/ | ||
| + | ^Set Clock|| | ||
| + | ^Picture No.|01 Photo/02 Photos/03 Photos| | ||
| + | ^Video Length|AVI 1 Sec thru AVI 60 Sec| | ||
| + | ^Interval|0 Sec thru 60 Min| | ||
| + | ^Sense Level|Off/ | ||
| + | ^Time Stamp|On/ | ||
| + | ^Timer1|On/ | ||
| + | ^Timer2|On/ | ||
| + | ^Password Set|On/Off| | ||
| + | ^Serial NO|On/Off| | ||
| + | ^Time Lapse|On/ | ||
| + | ^Side PIR|On/Off| | ||
| + | ^Recycle|On/ | ||
| + | ^TV mode|NTSC/ | ||
| + | ^Version|V161027_53W| | ||
| + | ^Default Set|| | ||
| + | In this revision of the firmware, if there is no SD card present a live screen appears with "No SD Card!" overlaid, menus are available. | ||
| + | \\ | ||
| + | \\ | ||
| + | |||
| + | ---- | ||
| + | ===== Examples ===== | ||
| + | |{{: | ||
| + | |{{electronic: | ||
| + | |{{: | ||
| + | \\ | ||
| + | \\ | ||
| + | / | ||
| + | / | ||
| + | / | ||
| + | \\ | ||
| + | \\ | ||
| + | /* |{{electronic: | ||
| + | |||
| + | {{: | ||
| + | |||
| + | /* |{{: | ||
| + | {{: | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Tear down ===== | ||
| + | |||
| + | The backplate is held on by 6 screws, and after releasing the PCB ribbon cable to the keypad, opens out to reveal the colour LCD and SD card socket: | ||
| + | |||
| + | / | ||
| + | |||
| + | / | ||
| + | |||
| + | The Off/On/Test switch (seen in the bottom right corner of the above photo) is a weak point in these cameras. | ||
| + | |||
| + | /* {{: | ||
| + | |||
| + | The screws, securing the backplate, screw into mounts through silicon washers to minimise moisture ingress : | ||
| + | |||
| + | /* |{{electronic: | ||
| + | |||
| + | The rear panel LCD is connected via a 40 pin flex cable, and mounted in a plastic carrier. | ||
| + | /* |{{electronic: | ||
| + | |{{electronic: | ||
| + | |||
| + | ====== References and Additional Resources ====== | ||
| + | * {{ltl-acorn-ltl-5310_20manual.pdf}} | ||
| + | |||
| + | |||
| + | < | ||
| + | \\ | ||
| + | ---- | ||
| + | < | ||
| + | \\ | ||