Differences
This shows you the differences between two versions of the page.
|
electronic:actuator:dcmotor:13.65.12 [2020/02/12 21:51] tony [Examples] |
electronic:actuator:dcmotor:13.65.12 [2023/06/19 07:16] (current) tony |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| {{ :electronic:actuator:dcmotor:.jpg?150|13.65.12}} | {{ :electronic:actuator:dcmotor:.jpg?150|13.65.12}} | ||
| ^ DC Motor Description ||||| | ^ DC Motor Description ||||| | ||
| - | ^Manufacturer||Buehler Products Inc.||| | + | ^Model||**13.65.12/12 V**||| |
| - | ^Model||**13.65.12/12V**||| | + | ^Manufacturer||[[https://www.buehlermotor.com/en|Buehler Products Inc.]]||| |
| ^Recovered from||-||| | ^Recovered from||-||| | ||
| ^Normal voltage||12 VDC||| | ^Normal voltage||12 VDC||| | ||
| ^Voltage range|| VDC||| | ^Voltage range|| VDC||| | ||
| ^Performance^^V, no load^V, g-cm load^, g-cm load| | ^Performance^^V, no load^V, g-cm load^, g-cm load| | ||
| - | | ^Speed|,000 RPM|,000 RPM| | | + | ^ ^Speed|,000 RPM|,000 RPM| | |
| - | | ^Current| | mA| | | + | ^ ^Current| | mA| | |
| - | ^Stall current|| ||| | + | |
| - | ^Starting torque|| g-cm||| | + | |
| ^Rotation||Either direction, depending on power polarity||| | ^Rotation||Either direction, depending on power polarity||| | ||
| ^Dimensions^^(not including shaft)^Shaft|| | ^Dimensions^^(not including shaft)^Shaft|| | ||
| - | | ^Length| mm| mm|| | + | ^ ^Length| mm| mm|| |
| - | | ^Diameter| mm| mm|| | + | ^ ^Diameter| mm| mm|| |
| ^Weight|| g||| | ^Weight|| g||| | ||
| ^Connectors|| ||| | ^Connectors|| ||| | ||
| Line 23: | Line 21: | ||
| |Green and Yellow|Velocity sensor| | |Green and Yellow|Velocity sensor| | ||
| - | The tachometer provides a sinusoidal voltage with varying frequency and amplitude. You can use a full-wave rectifier and capacitor to turn this signal into DC. Calibration is required. | + | The tachometer provides a sinusoidal voltage with varying frequency and amplitude. You can use a full-wave rectifier and capacitor to turn this signal into DC. Calibration is required. (Sinusoidal Encoder output 11.0 VAC - 850 Hz @ 12 VDC input for 13-65-36 ((https://www.electronicsurplus.com/buehler-13-65-36-motors-dc-6-24vdc-tach-output))) |
| - | \\ | + | ---- |
| - | ==== Examples ==== | + | |
| + | ===== Examples ===== | ||
| {{:electronic:actuator:dcmotor:.jpg?800|13.65.12}} | {{:electronic:actuator:dcmotor:.jpg?800|13.65.12}} | ||
| - | ==== References ==== | + | ===== References ===== |
| * [[https://academic.csuohio.edu/richter_h/courses/mce380/DCmotor_estim.pdf|Estimation of DC Motor Dynamic Parameters]] | * [[https://academic.csuohio.edu/richter_h/courses/mce380/DCmotor_estim.pdf|Estimation of DC Motor Dynamic Parameters]] | ||
Page Tools
electronic/actuator/dcmotor/13.65.12.1581497510.txt.gz · Last modified: 2020/02/12 21:51 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported