My Projects

You are here: start » arduino » mx300_driver_library

My Projects

User Tools

Site Tools

You are here: start » arduino » mx300_driver_library

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
arduino:mx300_driver_library [2022/08/18 02:55] – tonyarduino:mx300_driver_library [2023/03/12 09:01] (current) – tony
Line 40: Line 40:
 The control and data pins can be any available Arduino pins. The control and data pins can be any available Arduino pins.
  
-===== LCD Library =====+===== LCD library =====
  
 As mentioned earlier the library is based on a standard Arduino HD44780 LCD library.  Most hardware commands, including programmable characters,  seem to be compatible with the Hitachi HD44780.  I did find commands for transforming the orientation of the display, you can reflect it horizontally, vertically or both at once (equivalent to a 180 degree rotation), but I would need to do a lot of experimentation to find all the extended commands. As mentioned earlier the library is based on a standard Arduino HD44780 LCD library.  Most hardware commands, including programmable characters,  seem to be compatible with the Hitachi HD44780.  I did find commands for transforming the orientation of the display, you can reflect it horizontally, vertically or both at once (equivalent to a 180 degree rotation), but I would need to do a lot of experimentation to find all the extended commands.

Page Tools

arduino/mx300_driver_library.1660791311.txt.gz · Last modified: 2022/08/18 02:55 by tony
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International