LCD Description | |
---|---|
Model | |
Manufacturer | Lenco |
Recovered from | Lenco Lucille Retro Radio |
Board IDs | E345317, 0010-RDD691A-OKB, JJ3742, RDD691A-KB |
LCD type | negative |
Polarizer type | transflective |
Columns | 16 |
Rows | 2 |
Char matrix | 5×8 |
Driver IC | ST7032 (CoG) 1) |
Backlight | blue LED |
Arduino driver | |
Connector | Pins |
Num Pins | 10 |
Pin spacing | 0.1” |
Connector pin-out | |||||
---|---|---|---|---|---|
Pin# | Label | Description | Measured | Pin | colour |
1 | RST | Reset | |||
2 | RS | Register select | |||
3 | CS | Chip select | |||
4 | SCL | Clock | |||
5 | SDA | Data | |||
6 | GND | Ground | |||
7 | VDD | 3.3V | |||
8 | CAP | 2.6V | |||
9 | CAP | 3.11V, 22.5mS waveform, 2.6V-4.5V | |||
10 | VLCD | -0.6V, 22.5mS waveform, 0V to -2V |