LCD Description | |
---|---|
Model | 1602F, 126-00065-00 |
Manufacturer | Winstar |
Recovered from | Pulsar 1500 UPS |
Board IDs | LYNX LCD 098-02026-00, 00100575991053 |
LCD type | positive |
Polarizer type | transflective |
Columns | 16 |
Rows | 2 |
Char matrix | 5×8 |
Driver IC | ST7066 1) |
Backlight | blue LED 2) |
Arduino driver | LiquidCrystal.h |
Connector | pin header |
Num Pins | 16 |
Pin spacing | 0.1” |
Connector pin-out | Arduino test rig | ||
---|---|---|---|
Pin# | Label | Description | Pin |
1 | Vss | Ground | GND |
2 | Vdd | Power supply for logic | +5V |
3 | Vo | Contrast adjustment | 3) |
4 | RS | Data/Instruction select signal | 8 |
5 | R/W | Read/Write select signal | GND |
6 | E | Enable signal | 9 |
7 | DB0 | Data bus line | |
8 | DB1 | Data bus line | |
9 | DB2 | Data bus line | |
10 | DB3 | Data bus line | |
11 | DB4 | Data bus line | 4 |
12 | DB5 | Data bus line | 5 |
13 | DB6 | Data bus line | 6 |
14 | DB7 | Data bus line | 7 |
15 | A | Power supply for B/L + | 4V |
16 | K | Power supply for B/L - | 0v |