{{ :electronic:lcd:p7069623a.jpg?200|PTP008471}}
^  LCD Description  ||
^Model|**PTP008471**|
^Manufacturer|Kenwood|
^Recovered from|DPX-MP4050B (({{ :electronic:manual:kenwood_dpx-3030_mp4030.pdf}}))|
^LCD type|positive|
^Polarizer type|transflective|
^Columns|8|
^Rows|1|
^Char matrix|5x7|
^Driver IC|LC75808 (({{:electronic:datasheet:sanyo:lc75808w_491687.pdf|LC75808W (2000)}}, {{:electronic:datasheet:sanyo:lc75808w_4774320.pdf|LC75808W (2010)}}))|
^Backlight|LED ((changeable coloured background))|
^Arduino driver| |
^Connector| |
^Num Pins|16|
^Pin spacing|0.05"|

^  Connector pin-out  ^^^||
^Pin#^IC pin^Label^Pin^colour|
^1| |D GND|
^2|CL 99|CLK|
^3|DI 100|DO|
^4|DO 97|DI|
^5|INH 96|INH|
^6|CE 98|CE|
^7| |LED GRN|
^8| |LED BLU|
^9| |LED RED|
^10| |RST-SW|
^11| |ILL GND|
^12| |P GND|
^13| |REMO|
^14| |BU5V|
^15| |LED11V|
^16| |ILLUMI|
\\
Controller appears to contain no buffer ram, so display must be updated continuously.  Probably not useful for most Arduino projects.
\\
====Related datasheets====
{{:electronic:datasheet:sanyo:lc75808w_491687.pdf|LC75808W (2000)}}, 
{{:electronic:datasheet:sanyo:lc75808w_4774320.pdf|LC75808W (2010)}}

{{:electronic:datasheet:sanyo:ccb-datasheet.pdf|Sanyo Computer Control Bus (CCB) protocol.}}\\
[[https://github.com/RodLophus/SanyoCCB|Sanyo CCB control from Arduino]]

----
  * PTP008471 schematic:\\
{{:electronic:lcd:ptp008471-p9.png?800|PTP008471 pcb}}

{{:electronic:lcd:ptp008471-p10.png?800|PTP008471 pcb}}

{{:electronic:lcd:ptp008471-p13.png?800|PTP008471 circuit}}

{{:electronic:lcd:ptp008471-p14.png?800|PTP008471 pixel layout}}
----
===== Examples : =====

{{:electronic:lcd:p7069623a.jpg?800|PTP008471 overview with board}}

{{:electronic:lcd:p7069624a.jpg?800|PTP008471 overview with board}}

{{:electronic:lcd:p7079640.jpg?300|PTP008471 connector}}

{{:electronic:lcd:p7069625.jpg?300|PTP008471 chip}}