{{ :electronic:lcd:pb112678a.jpg?200|B53K280-2}}
^  LCD Description  ||
^Model|**8A348** |
^Manufacturer|Brother|
^Recovered from|Brother FAX-520MC (({{:electronic:manual:brother_mfc370mc_service_manual.pdf}}))|
^Board IDs|B53K280-2|
^LCD type|positive|
^Polarizer type|reflective|
^Columns|16  ((setup as two rows of 8 characters on one line))|
^Rows|1|
^Char matrix|5x8|
^Driver IC|Hitachi HD44780 compatible (CoG)|
^Backlight|-|
^Arduino driver|LiquidCrystal.h|
^Connector|PCB flex cable|
^Num Pins|14|
^Pin spacing|0.04”|

^  Connector pin-out  ||^  Arduino test rig |
^Pin#^Label^Description ^Pin|
^1|D7| |d7|
^2|D6| |d6|
^3|D5| |d5|
^4|D4| |d4|
^5|D3| | |
^6|D2| | |
^7|D1| | |
^8|D0| | |
^9|E| |d9|
^10|R/W| |Gnd|
^11|RS| |d8|
^12|VO| |Contrast adjustment ((connect to potentiometer between Vcc and GND))|
^13|+5V| |+5V|
^14|GND| |Gnd|

^  Connector to flex PCB cable to LCD module  ||||||
^ ||||^  Arduino test rig ((reminder for my personal testing, not useful for anyone else!))  |
^Label^Pin#| ^Pin#^Label^Pin|
| ^ | ^1|D7|d7|
|D6^2| ^ | |d6|
| ^ | ^3|D5|d5|
|D4^4| ^ | |d4|
| ^ | ^5|D3| |
|D2^6| ^ | | | 
| ^ | ^7|D1| |
|D0^8| ^ | | |
| ^ | ^9|E|d9|
|R/W^10| ^ | |Gnd|
| ^ | ^11|RS|d8|
|VO^12| ^ | |Contrast adjustment ((connect to potentiometer between Vcc and GND))|
| ^ | ^13|+5V|+5V|
|GND^14| ^ | |Gnd|
\\
\\

Same character set as [[:electronic/lcd/b53k2631]]
----
  * 8A348 LCD schematic:\\
{{:electronic:lcd:brother_fax255_sm.png?800|B53K2802 circuit}}
----
===== Examples : =====

{{:electronic:lcd:pb112678a.jpg?800|B53K280-2 front}}

{{:electronic:lcd:pb112679a.jpg?800|B53K280-2 back}}

{{:electronic:lcd:p7049558.jpg?800|B53K2802 overview with board}}

{{:electronic:lcd:p7049559.jpg?800|B53K2802 overview with board}}

{{:electronic:lcd:p7049560.jpg?800|B53K2802 connector}}

{{:electronic:lcd:p7049568.jpg?800|B53K2802 connector}}

{{:electronic:lcd:p7049565a.jpg?800|B53K2802 chip}}

{{:electronic:lcd:p7049570a.jpg?400|B53K2802 chip}}