{{ :electronic:stepper:.jpg?150|KP4M4-001}}
^  Stepper Description  |||
^Model| |**KP4M4-001**, 966000-001|
^Manufacturer| |Tandon (also made by Japan Servo Motors)|
^Recovered from| |[[:electronic:equipment:fdd:tm100|Tandon TM100-2A]]|
^Drive method| |unipolar|
^Number of phases| |4|
^Winding colours| |-|
^Step angle|(deg)/step|3.6|
^Voltage|V|12|
^Current|A/phase|0.15|
^Winding resistance|ohm/phase|75|
^Inductance|mH/phase|-|
^Holding torque|mN*m|-|
^Detent torque|mN*m|-|
^Rotor inertia|g*cm*cm|-|
^Height|mm|42|
^Width|mm|42 (Nema 17)|
^Shaft length|mm|27|
^Shaft diameter|mm|5|
^Weight|g|268|
^Insulation Class| |-|
^Insulation resistance| |-|
^Dielectric strength| |-|
^Operating temperature range|(deg)C|-|
^Allowable temperature rise|(deg)|-|


\\
==== Examples ====
See https://web.archive.org/web/20080212133818/https://www.doc.ic.ac.uk/~ih/doc/stepper/kp4m4/

{{:electronic:stepper:.jpg?800|KP4M4-001}}