{{ :electronic:stepper:dsc_5848a.jpg?150|TEAC 14769070-10}}
^  Stepper Description  |||
^Model| |**TEAC 14769070-10**|
^Manufacturer| |Shinano Kenshi|
^Drive method| |unipolar 6 wire|
^Number of phases| |4|
^Winding colours| |white-brown-red, blue-brown-yellow|
^Step angle|(deg)/step|1.8|
^Voltage|V|12?|
^Current|A/phase|-|
^Winding resistance|ohm/phase|70|
^Inductance|mH/phase|-|
^Holding torque|mN*m|-|
^Detent torque|mN*m|-|
^Rotor inertia|g*cm*cm|-|
^Height|mm|32|
^Width| mm|39  (Nema 15)|
^Shaft length|mm|10|
^Shaft diameter|mm|5|
^Weight|g|-|
^Insulation Class| |-|
^Insulation resistance| |-|
^Dielectric strength| |-|
^Operating temperature range|(deg)C|-|
^Allowable temperature rise|(deg)|-|

\\
----
==== Examples ====
From 5-1/4 inch floppy drive (head positioning motor) :

{{:electronic:stepper:dsc_5848a.jpg?800|TEAC 14769070-10}}

{{:electronic:stepper:p4048543.jpg?800|TEAC 14769070-10}}

{{:electronic:stepper:p4048546.jpg?800|TEAC 14769070-10}}

{{:electronic:stepper:p4048542.jpg?800|TEAC 14769070-10}}

{{:electronic:stepper:p4048545.jpg?800|TEAC 14769070-10}}

===== Other resources =====

  * [[https://web.archive.org/web/20100305181906/http://www.doc.ic.ac.uk/~ih/doc/stepper/others/example2/|Pinout]] investigation, but theirs has the two brown lines connected together.
  * [[http://wiring.org.co/learning/topics/steppermotor.html|Driving with L293D]]
  * [[https://web.archive.org/web/20180404103050/http://klinikrobot.com/component/virtuemart/nema17-stepper-motor/teac-14769070-90.html|5V version of this drive]]