Published 15 Sep 2020

3Dprinter

\\ ===== Overview ===== A 3D printer can create many things, one use that appeals to me is creating a 3D printer from scrap parts that is useful enough to print parts for a better 3D printer. That is, bootstrapping the process of creating a good 3D printer, without having to have access to one to start with. So this page is initially just going to be a collection of links to other useful pages. ===== Hardware description ===== ====== References and Additional Resources ====== * **From E-Waste** * [[https://arduino-pi.blogspot.com/2014/04/my-journey-into-building-3d-printer.html|Building a 3d printer from old printer parts.]] * [[https://lizzit.it/printer/|3D printer from old inkjet printers.]] * [[http://diy3dprinting.blogspot.com/2013/11/diy-3d-printers-made-from-wood.html|3D printers made from wood.]] * [[https://www.ulule.com/wafate/|Wafate 3D printer from e-waste.]] * [[https://atmelcorporation.wordpress.com/2014/06/02/creating-a-3d-printer-for-under-100/|Poor Man’s 3D Printer.]] * [[https://www.instructables.com/id/DIY-delta-3D-printer-using-low-cost-recycled-parts/|Delta 3D printer using low cost recycled parts]] * [[https://reprap.org/wiki/Build_A_RepRap|Reprap]] * [[https://reprap.org/wiki/Delta_geometry|Delta geometry]] * [[https://www.researchgate.net/figure/Kinematic-scheme-of-two-manipulating-standard-types-of-robots-SCARA-1-pictured-left_fig1_311098885|Kinematic scheme of two manipulating standard types of robots SCARA]]

If any referenced page no longer exists, try looking for its URL on http://archive.org.

\\ ----

[[:start|Home Page]] [[:about|About this Site]] [[:copyright|Copyright Questions]] [[:contact|Contact Us]]

\\ \\